304x Filetype PDF File size 1.50 MB Source: www.gpdarbhanga.org.in
Established under Department of Science and Technology, Patna, Bihar
Applied Physics Lab Manual
For :
Diploma Students (All Branches) First Semester
Department of Physics, Govt. Polytechnic, Nawada, Khanwan - 805122
Applied Physics Lab Manual, Govt. Polytechnic, Nawada
Acknowledgements
During the course of applied physics lab manual preparation I have received
much support, encouragement, advice and assistance from many people and I am deeply
grateful to all of them.
I wish to thank and express my gratitude to Dr. Anand Krishna, Principal In
charge G. P., Nawada for his valuable suggestions, inspiring spirits, extensive guidance,
constant encouragement, constructive criticism in course of present assignment and for a
critical review of the entire manual.
I also wish to express heartfelt thanks to all my colleagues for their ceaseless
help and co-operation throughout this task.
I am greatly obliged to all the non-teaching staff of our institute for providing
me time to time help at various stages of my work.
Prof. Ravi Kumar
Lecturer (Physics)
Govt. Polytechnic, Nawada
2
Applied Physics Lab Manual, Govt. Polytechnic, Nawada
PREFACE
This Laboratory manual is designed to cover the applied physics experiments
st
prescribed for I semester diploma students by SBTE, Bihar.
Each article contains list of equipment, theory, procedure, observation table
and method of final calculation, precaution etc.
The present manual contains eight experiments (Complied by Prof. Ravi
Kumar) and kept open ended for incorporating additional experiments in future.
The manual is meant for internal use only.
3
Applied Physics Lab Manual, Govt. Polytechnic, Nawada
INDEX
S. No. Name of experiment Page No.
1 To calculate the volume of the given solid cylinder 5-8
using vernier calliper.
2 To determine the cross sectional area of thin wire using 9-11
micrometer screw gauge.
3 To study the relation between frequency and length of a 12-14
stretch string using a Sonometer.
4 To determine the value of ‘g’ (accelerator due to 15-18
gravity) by using a simple Pendulum.
5 To find the angle of minimum deviation of a given glass 19-22
prism.
6 To determine the given carbon resistance using a 23-26
Multimeter and to compare it with measured value with
the written in Colour Code.
7 To Verify Ohm’s Law by using an Ammeter & 27-29
Voltmeter.
8 To determine the thermal conductivity of a bad 30-33
conductor by Lee’s method.
4
no reviews yet
Please Login to review.